Menu

2967468 - Phoenix Contact Solid-State Relay Module

Solid-state relay module PLC-INTERFACE, consisting of PLC-BSC basic terminal block with screw connection and plug-in miniature solid-state relay, for mounting on NS 35/7,5 DIN rails, input: 60 V DC, output: 3 - 33 V DC/3 A


Part #: 2967468
$44.25Add to Cart
Availability :
Backordered

Phoenix Contact Solid-State Relay Module

Output Current: 3 A
Input Voltage: 60 VDC
Relay Type: Plug-in Miniature Solid-State Relay
Module Type: PLC Interface
Terminal Type: Basic Terminal Block PLC-BSC
Output Voltage: 3-33 VDC
Panel Components Products: Relays
Relays Products: Solid State Relays
Product Type: Solid-State Relay Module
  • Connection data
    Conductor cross section AWG/kcmil max: 14
    Conductor cross section AWG/kcmil min.: 26
    Conductor cross section solid max.: 2.5 mm²
    Conductor cross section solid min.: 0.14 mm²
    Conductor cross section stranded max.: 2.5 mm²
    Conductor cross section stranded min.: 0.14 mm²
    Connection method: Screw connection
    Screw thread: M3
    Stripping length: 8 mm
  • General data
    Ambient temperature (operation): -25 °C ... 60 °C
    Ambient temperature (storage/transport): -25 °C ... 70 °C
    Assembly instructions: In rows with zero spacing
    Depth: 94 mm
    Height: 80 mm
    Inflammability class according to UL 94: V0
    Mounting position: Any
    Name: Standards/regulations
    Operating mode: 100% operating factor
    Pollution degree: 2
    Rated surge voltage / insulation: Basic insulation
    Standards/regulations: IEC 60664
    Standards/regulations: EN 50178
    Standards/regulations: IEC 62103
    Test voltage input/output: 2.5 kV (50 Hz, 1 min.)
    Width: 6.2 mm
  • Input data
    Input voltage range in reference to U<sub>N</sub>: 0.8 ... 1.2
    Nominal input voltage U<sub>N</sub>: 60 V DC
    Operating voltage display: Yellow LED
    Protective circuit/component: Polarity protection diode
    Protective circuit/component: Damping diode
    Switching threshold "0" signal in reference to U<sub>N</sub>: ? 0.3
    Switching threshold "1" signal in reference to U<sub>N</sub>: ? 0.8
    Transmission frequency: 100 Hz
    Type of protection: Protection against polarity reversal
    Type of protection: Free-wheeling diode
    Typical input current at U<sub>N</sub>: 5 mA
    Typical response time: 40 µs (at U<sub>N</sub>)
    Typical turn-off time: 500 µs (at U<sub>N</sub>)
  • Output data
    Limiting continuous current: 3 A (see derating curve)
    Maximum inrush current: 15 A (10 ms)
    Output circuit: 2-wire, floating
    Output voltage range: 3 V DC ... 33 V DC
    Protective circuit/component: Polarity protection diode
    Type of protection: Protection against polarity reversal
    Type of protection: Surge protection
    Voltage drop at max. limiting continuous current: ? 200 mV
Email this page to a friend
Part Number Tags: N/A

This part number has been discontinued by {Manufacturer}. Use the contact form below to find out the new compatible part.

Updating...