Menu

2966207 - Phoenix Contact Relay Module

Relay Module PLC relay, consisting of base terminal block PLC-BSC-/21 with screw connection and pluggable miniature relay with power contact, for assembly on DIN rail NS 35/7.5, 1 PDT, input voltage 230 V AC / 220 V DC


Part #: 2966207
$275.00 / Pack of 10Add to Cart
(Phoenix Contact restricts buying this item to increments of 10)
Availability :
Backordered

Phoenix Contact Relay Module

Connection: Screw Connection
Relay Type: PLC Relay, Pluggable Miniature Relay
Terminal Type: Base Terminal Block PLC-BSC-/21
Includes: Power Contact
Contact Type: 1 PDT
Input Voltage: 230 VAC / 220 VDC
Panel Components Products: Relays
Relays Products: Solid State Relays
Product Type: Relay Module
Contact type: 1 PDT
  • Coil side
    Nominal input current at U<sub>IN</sub>: 3.2 mA (at U<sub>N</sub> = 230 V AC)
    Nominal input current at U<sub>IN</sub>: 3 mA (at U<sub>N</sub> = 220 V DC)
    Nominal input voltage U<sub>N</sub>: 230 V AC (220 V DC)
    Nominal input voltage U<sub>N</sub>: 220 V DC
    Operating voltage display: Yes
    Protective circuit: Bridge rectifier Bridge rectifier
    Typical release time: 15 ms
    Typical response time: 7 ms
  • Connection data
    Conductor cross section AWG/kcmil max: 14
    Conductor cross section AWG/kcmil min.: 26
    Conductor cross section solid max.: 2.5 mm²
    Conductor cross section solid min.: 0.14 mm²
    Conductor cross section stranded max.: 2.5 mm²
    Conductor cross section stranded min.: 0.14 mm²
    Connection method: Screw connection
    Screw thread: M3
    Stripping length: 8 mm
  • Contact side
    Contact material: AgSnO
    Contact type: Single contact, 1-PDT
    Interrupting rating (ohmic load) max.: 140 W (at 24 V DC)
    Interrupting rating (ohmic load) max.: 20 W (for 48 V DC)
    Interrupting rating (ohmic load) max.: 18 W (for 60 V DC)
    Interrupting rating (ohmic load) max.: 23 W (for 110 V DC)
    Interrupting rating (ohmic load) max.: 40 W (for 220 V DC)
    Interrupting rating (ohmic load) max.: 1500 VA (for 250 V AC)
    Limiting continuous current: 6 A
    Maximum inrush current: (on request)
    Maximum switching voltage: 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
    Min. switching current: 10 mA (at 12 V)
    Minimum switching voltage: 5 V (at 100 mA)
  • General data
    Ambient temperature (operation): -40 °C ... 55 °C
    Ambient temperature (storage/transport): -40 °C ... 85 °C
    Assembly instructions: In rows with zero spacing
    Depth: 94 mm
    Height: 80 mm
    Inflammability class according to UL 94: V0
    Mechanical service life: 2 x 10<sup>7</sup> cycles
    Mounting position: Any
    Name: Standards/regulations
    Operating mode: 100% operating factor
    Pollution degree: 3
    Standards/regulations: IEC 60664
    Standards/regulations: EN 50178
    Standards/regulations: IEC 62103
    Surge voltage category: III
    Test voltage relay winding/relay contact: 4 kV AC (50 Hz, 1 min.)
    Width: 6.2 mm
Email this page to a friend
Part Number Tags: N/A

This part number has been discontinued by {Manufacturer}. Use the contact form below to find out the new compatible part.

Updating...