Menu

2962900 - Phoenix Contact Active Modules

Active module VARIOFACE COMPACT LINE, output module with 8 miniature relays, 1 N/O contact each, plugged, for 24 V DC (incl. relay)


Part #: 2962900
$369.08Add to Cart
Availability :
Backordered

Phoenix Contact Active Modules

Input Voltage: 24 VDC
Includes: 8 Miniature Relays
Contact Type: 1 N/O Contact Each
Module Type: VARIOFACE COMPACT LINE Output Module
Product Type: Active Modules
Contact type: 1 N/O Contact Each
  • Connection data for connection 1
    Connection method: IDC/FLK pin strip (2.54 mm)
    Connection name: Coil side
    Number of connections: 1
    Number of positions: 14
  • Connection data for connection 2
    Conductor cross section AWG/kcmil min.: 26
    Conductor cross section solid max.: 1.5 mm²
    Conductor cross section solid min.: 0.14 mm²
    Conductor cross section stranded max.: 1.5 mm²
    Conductor cross section stranded min.: 0.14 mm²
    Connection method: Screw connection
    Connection name: Contact side
    Number of connections: 18
    Number of positions: 3
  • General data
    Ambient temperature (operation): -20 °C ... 50 °C
    Ambient temperature (storage/transport): -20 °C ... 70 °C
    Assembly instructions: In rows with zero spacing
    Color: green
    Compatible components: Miniature relay, REL-MR-G 24/1
    Depth: 50 mm
    Height: 45 mm
    Housing insulation material: PVC, side panel PA non-reinforced,
    Mechanical service life: 2 x 10<sup>7</sup> cycles
    Mounting position: Any
    No. of channels: 8
    Operating mode: 100% operating factor
    Pollution degree: 2
    Standards/regulations: IEC 60664
    Standards/regulations: DIN EN 50178
    Standards/regulations: IEC 62103
    Surge voltage category: III
    Test voltage: 2 kV AC (50 Hz, 1 min.)
    Width: 103 mm
    With components: Yes
  • Input data
    Input voltage range in reference to U<sub>N</sub>: 0.8 ... 1.1
    Nominal input voltage U<sub>N</sub>: 24 V DC
    Operating voltage display: Green LED
    Protective circuit/component: Damping diode
    Status display/channel: Yellow LED
    Type of protection: Free-wheeling diode
    Typical input current at U<sub>N</sub>: 6.5 mA
    Typical release time: 15 ms
    Typical response time: 5 ms
  • Output data
    Contact material: AgNi, 5 µm hard gold-plated
    Contact type: 1 N/O contact (double contact)
    Interrupting rating (ohmic load) max.: 72 W (24 V DC)
    Interrupting rating (ohmic load) max.: 60 W (48 V DC)
    Interrupting rating (ohmic load) max.: 50 W (60 V DC)
    Interrupting rating (ohmic load) max.: 50 W (110 V DC)
    Interrupting rating (ohmic load) max.: 750 VA (250 V AC)
    Limiting continuous current: 3 A
    Maximum inrush current: 5 A
    Maximum switching voltage: 250 V AC
    Maximum switching voltage: 125 V DC
    Min. switching current: 1 mA
    Minimum switching voltage: 5 V
Email this page to a friend
Part Number Tags: N/A

This part number has been discontinued by {Manufacturer}. Use the contact form below to find out the new compatible part.

Updating...