Menu

2834465 - Phoenix Contact Relay Module

Relay Module Preassembled relay modules with spring-cage connection, consisting of: Relay socket, multi-layer contact relay, pluggable display or interference suppression module and retaining bracket. Input voltage: 120 V AC, 1 PDT, 10 A


Part #: 2834465
$202.50 / Pack of 5Add to Cart
(Phoenix Contact restricts buying this item to increments of 5)
Availability :
Backordered

Phoenix Contact Relay Module

Connection: Spring-Cage Connection
Contact Type: 1 PDT
Input Voltage: 120 VAC
Module Type: Preassembled Relay Modules
Includes: Relay Socket, Multi-Layer contact Relay, Pluggable Display or Interference Suppression Module and Retaining Bracket
Limiting Continuous Current: 10 A
Product Type: Relay Module
Contact type: 1 PDT
Limiting continuous current: 10 A
  • Coil side
    Nominal input current at U<sub>IN</sub>: 9 mA (at 50 Hz)
    Nominal input current at U<sub>IN</sub>: 7 mA (At 60 Hz)
    Nominal input voltage U<sub>N</sub>: 120 V AC
    Operating voltage display: Yellow LED
    Protective circuit: Varistor
    Typical release time range: 1.5 ms ... 16 ms
    Typical response time: 3 ms ... 12 ms
  • Connection data
    Conductor cross section AWG/kcmil max: 16
    Conductor cross section AWG/kcmil min.: 24
    Conductor cross section solid max.: 1.5 mm²
    Conductor cross section solid min.: 0.2 mm²
    Conductor cross section stranded max.: 1.5 mm²
    Conductor cross section stranded min.: 0.2 mm²
    Connection method: Spring-cage connection
    Stripping length: 10 mm
  • Contact side
    Contact material: AgNi, hard gold-plated
    Contact type: Single contact, 1-PDT
    Interrupting rating (ohmic load) max.: 2500 VA (for 250 V AC)
    Limiting continuous current: 50 mA
    Limiting continuous current: 10 A
    Maximum inrush current: 50 mA
    Maximum inrush current: 30 A (300 ms)
    Maximum switching voltage: 30 V AC
    Maximum switching voltage: 36 V DC
    Maximum switching voltage: 250 V AC/DC
    Min. switching current: 1 mA (at 24 V)
    Min. switching current: 100 mA
    Minimum switching voltage: 100 mV (at 10 mA)
    Minimum switching voltage: 12 V
    Note: the following values are applicable if a gold layer is destroyed
  • General data
    Ambient temperature (operation): -25 °C ... 60 °C
    Ambient temperature (storage/transport): -25 °C ... 85 °C
    Assembly instructions: In rows with zero spacing
    Depth: 72 mm
    Height: 97 mm
    Mechanical service life: 3 x 10<sup>7</sup> cycles
    Mounting position: Any
    Operating mode: 100% operating factor
    Pollution degree: 3
    Standards/regulations: IEC 60664
    Standards/regulations: EN 50178
    Standards/regulations: IEC 62103
    Surge voltage category: III
    Test voltage relay winding/relay contact: 4 kV (50 Hz, 1 min.)
    Width: 16 mm
Email this page to a friend
Part Number Tags: N/A

This part number has been discontinued by {Manufacturer}. Use the contact form below to find out the new compatible part.

Updating...