2832564 - Phoenix Contact Ethernet Hub

Ethernet hub DIN rail mountable Ethernet hub with 16 RJ45 ports supports Ethernet with 10 Mbps as well as with 100 Mbps

Part #: 2832564
$739.00Add to Cart
Availability :

Phoenix Contact Ethernet Hub

Transmission speed: 10/100 MBit/s
Ports: 16 RJ45
Product Type: Ethernet Hub
Transmission Speed: 10/100 MBit/s
  • Conformity with EMC directives
    Developed in acc. with standard: IEC 61000-6.2
    Test result: Criterion B
    Test result: Criterion A
    Test result: Criterion B
    Test result: Criterion B
    Test result: Criterion A
    Test result: Criterion A
    Test standard: IEC 61000-4-2 (ESD)
    Test standard: IEC 61000-4-3 (immunity to radiated interference)
    Test standard: IEC 61000-4-4 (burst)
    Test standard: IEC 61000-4-5 (surge)
    Test standard: IEC 61000-4-6 (immunity to conducted interference)
    Test standard: IEC 61000-4-8 (immunity to magnetic fields)
  • Function
    Basic functions: Hub/repeater, compliance with IEEE 802.3
    Status and diagnostic indicators: LEDs: UL (communications voltage), COL (collision) link and receive LED per port
  • General data
    Air pressure (operation): 86 kPa ... 108 kPa (1500 m above sea level)
    Air pressure (storage/transport): 66 kPa ... 108 kPa (3500 m above sea level)
    Ambient temperature (operation): 0 °C ... 55 °C
    Ambient temperature (storage/transport): -25 °C ... 70 °C
    Degree of protection: IP20
    Depth: 112 mm
    Height: 99 mm
    Mounting type: DIN rail
    Noise emission: EN 61000-6-4
    Noise immunity: EN 61000-6-2:2005
    Permissible humidity (operation): 30 % ... 95 % (no condensation)
    Permissible humidity (storage/transport): 30 % ... 95 % (no condensation)
    Type AX: Stand-alone
    Weight: 280 g
    Width: 90 mm
  • Interfaces
    Connection method: RJ45 female connector
    Interface 1: Ethernet
    No. of ports: 16
    Signal LEDs: Data receive, link status
    Transmission length: 100 m
    Transmission physics: Ethernet RJ45
    Transmission speed: 10/100 MBit/s
  • Network expansion parameters
    Cascading depth: 4 hubs 10 Mbps / 2 hubs 100 Mbps
    Maximum conductor length ((twisted pair): 100 m
  • Supply voltage
    Residual ripple: 3.6 V<sub>PP</sub> (within the permitted voltage range)
    Supply voltage: 24 V DC (via COMBICON; max. conductor cross section 2.5 mm<sup>2</sup>)
    Supply voltage range: 18.5 V DC ... 30.5 V DC
    Typical current consumption: Typ. 144 mA (to U<sub>S</sub>)
Email this page to a friend
Part Number Tags: N/A

This part number has been discontinued by {Manufacturer}. Use the contact form below to find out the new compatible part.