2808001 - Phoenix Contact Surge Protection Device

Type 2 surge protection device Combination of pluggable type 2 arrester and selective residual current circuit breaker(RCD switch) for 3-phase power supply networks (5-conductor system: L1, L2, L3, N, PE).

View Larger Image of Phoenix Contact Surge Protection Device

Phoenix Contact Surge Protection Device

• Connection, protective circuit
  Conductor cross section AWG/kcmil max: 4
  Conductor cross section AWG/kcmil max: 2
  Conductor cross section AWG/kcmil min.: 12
  Conductor cross section AWG/kcmil min.: 12
  Conductor cross section solid max.: 16 mm²
  Conductor cross section solid max.: 25 mm²
  Conductor cross section solid min.: 4 mm²
  Conductor cross section solid min.: 4 mm²
  Conductor cross section stranded max.: 16 mm²
  Conductor cross section stranded max.: 25 mm²
  Conductor cross section stranded min.: 4 mm²
  Conductor cross section stranded min.: 4 mm²
  Connection method: Screw connection
  Connection method: Biconnect terminal block
  Connection method: Screw connection
  Connection method: Biconnect terminal block
  Connection name: Protective ground connection
  Connection name: Connection protective circuit
  Connection type IN: Biconnect screw terminal block
  Connection type IN: Biconnect screw terminal block
  Connection type OUT: Biconnect screw terminal block
  Connection type OUT: Biconnect screw terminal block
  Screw thread: M5
  Screw thread: M5
  Stripping length: 16 mm
  Stripping length: 16 mm
  Tightening torque: 4.5 Nm
  Tightening torque: 4.5 Nm
• Protective circuit
  Dimensioning error current: 300 mA
  Immunity to short-circuiting I_nc: 10 kA Back-up fuse: 63 A
  Rated making and breaking capacity I_m: 630 A
  Rated residual making and breaking capacity I_?m: 630 A
  Surge withstand capability: 6 kV (1.2/50 µs)
  Tripping time for 5xI_?n: ? 40 ms
  Tripping time for I_?n: ? 300 ms
• RCD switch
  Ambient temperature (operation): -25 °C ... 40 °C
  Ambient temperature (storage/transport): -40 °C ... 60 °C
  Color: light gray
  Degree of protection: IP20
  Depth: 76 mm
  Design: DIN rail module, two-section, divisible
  Direction of action: 3L-N & N-PE
  Height: 90 mm
  Housing material: PBT / PA
  IEC power supply system: TT
  IEC power supply system: TN-S
  Inflammability class according to UL 94: V0
  Message: Surge protection fault: Optical
  Mounting type: DIN rail: 35 mm
  Number of positions: 4
  Standards for air and creepage distances: IEC 61643-1
  Standards for air and creepage distances: IEC 60664-1
  Standards/regulations: IEC 61643-1 2005
  Standards/regulations: EN 61643-11 2002
  Standards/regulations: IEC 61008-1 2004
  Standards/regulations: IEC 61008-1/A11 2007
  Standards/regulations: IEC 61008-2-1 2000
  Standards/regulations: IEC 60947-3 2005
  Width: 121 mm
• Standards
  Arrester rated voltage U_C (L-N): 350 V AC
  Arrester rated voltage U_C (N-PE): 264 V AC
  EN type: T2
  Ground conductor current I_PE: ? 1 µA
  IEC category: II
  IEC category: T2
  Impulse operate voltage at 6 kV (1.2/50)µs (N-PE): ? 1.7 kV
  Max. discharge surge current Imax (8/20) µs maximum (L-N): 90 kA (all channels)
  Max. discharge surge current Imax (8/20) µs maximum (L-N): 30 kA
  Max. discharge surge current Imax (8/20) µs maximum (N-PE): 30 kA
  Nominal discharge surge current I_n (8/20) µs (L-N): 60 kA (all channels)
  Nominal discharge surge current I_n (8/20) µs (L-N): 20 kA
  Nominal discharge surge current I_n (8/20) µs (N-PE): 20 kA
  Nominal frequency f_N: 50 Hz
  Nominal frequency f_N: 60 Hz
  Nominal load current I_L: 40 A
  Nominal voltage U_N: 240 V AC (230/400 V AC ... 240/415 V AC)
  Nominal voltage U_N: 415 V AC (L-L)
  Protection level U_P (L-N): ? 2 kV
  Protection level UP (N-PE): ? 2 kV
  Residual voltage (L-N): ? 1.8 kV (at In)
  Residual voltage (L-N): ? 1.5 kV (at 10 kA)
  Residual voltage (L-N): ? 1.2 kV (at 5 kA)
  Residual voltage (L-N): ? 1 kV (at 3 kA)
  Residual voltage (L-PE): ? 2.5 kV (at In)
  Residual voltage (L-PE): ? 2 kV (at 10 kA)
  Residual voltage (L-PE): ? 1.4 kV (at 5 kA)
  Residual voltage (L-PE): ? 1.1 kV (at 3 kA)
  Residual voltage (N-PE): ? 0.7 kV (at In)
  Residual voltage (N-PE): ? 0.4 kV (at 10 kA)
  Residual voltage (N-PE): ? 0.3 kV (at 5 kA)
  Residual voltage (N-PE): ? 0.2 kV (at 3 kA)
  Response time (L-N): ? 25 ns
  Response time (L-PE): ? 100 ns
  Response time (N-PE): ? 100 ns
  Standby power consumption P_C: ? 90 mVA
  U_T (TOV-proof): 415 V AC (5 s)
  U_T (TOV-proof): 1200 V AC (200 ms / N-PE)