Menu

2805457 - Phoenix Contact Surge Protection Device

Type 2 surge protection device Surge arrester for 2-pos. isolated and grounded DC voltage systems 600 V DC, for DIN rail mounting, 3-pos. base element (L+, L-, ground), three pluggable temperature-monitored varistors, status message on each connector.


Part #: 2805457
$219.66Add to Cart
Availability :
Backordered

Phoenix Contact Surge Protection Device

Color: Black
Material: PBT, PA
Connecting Thread: M5
Type: 2, DIN Rail Module
Positions: 3
Protection Level: IP20
Nominal Voltage: 600 VDC
Connection: Screw Connection, Biconnect Terminal Block
Product Type: Surge Protection Device
  • Connection, protective circuit
    AWG conductor cross section: 10 ... 2 (UL)
    Conductor cross section AWG/kcmil max: 2
    Conductor cross section AWG/kcmil min.: 15
    Conductor cross section solid max.: 35 mm²
    Conductor cross section solid min.: 1.5 mm²
    Conductor cross section stranded max.: 25 mm²
    Conductor cross section stranded min.: 1.5 mm²
    Connection method: Screw connection
    Connection method: Biconnect terminal block
    Connection type IN: Biconnect screw terminal block
    Connection type OUT: Biconnect screw terminal block
    Screw thread: M5
    Stripping length: 16 mm
    Tightening torque: 4.5 Nm
    Tightening torque: 30 lb in (UL)
  • Protective circuit
    Arrester rated voltage U<sub>C</sub>: 600 V DC
    EN type: T2
    Ground conductor current I<sub>PE</sub>: ? 20 µA
    IEC category: II
    IEC category: T2
    Max. discharge surge current Imax (8/20) µs: 40 kA
    Nominal discharge surge current I<sub>n</sub> (8/20) µs: 15 kA
    Nominal load current I<sub>L</sub>: ? 80 A DC
    Nominal voltage U<sub>N</sub>: 600 V DC (Non-load voltage U<sub>OC</sub>)
    Protection level U<sub>p</sub>: ? 3 kV (15 kA)
    Protection level U<sub>p</sub>: ? 3.6 kV (20 kA)
    Protection level Up (L+) - (L-): ? 3 kV
    Protection level UP (L+/L-) - PE: ? 3 kV
    Residual voltage: ? 2.5 kV (at 5 kA)
    Residual voltage (L+) - (L-): ? 2.5 kV (at 5 kA)
    Residual voltage (L+/L-) - PE: ? 2.5 kV (at 5 kA)
    Response time: ? 25 ns
    Standby power consumption P<sub>C</sub>: ? 12 mW
  • Standards
    Ambient temperature (operation): -40 °C ... 80 °C
    Color: black
    Degree of protection: IP20
    Depth: 65.5 mm
    Design: DIN rail module, two-section, divisible
    Direction of action: (L+)-PE & (L-)-PE & (L+)-(L-)
    Height: 90 mm
    Housing material: PBT / PA
    Inflammability class according to UL 94: V0
    Message: Surge protection fault: Optical
    Mounting type: DIN rail: 35 mm
    Number of positions: 3
    Pitch unit: 3 Div.
    Standards for air and creepage distances: DIN EN 60664-1
    Standards for air and creepage distances: DIN EN 61643-11
    Width: 53.4 mm
Email this page to a friend
Part Number Tags: N/A

This part number has been discontinued by {Manufacturer}. Use the contact form below to find out the new compatible part.

Updating...