Menu

2736479 - Phoenix Contact Distributed I/O Device

Distributed I/O device The stand-alone device for CANopen^® has 16 digital inputs. The M12 connection is established using fast connection technology. The 24 V DC supply is protected against short circuit and overload. The nominal current of the device is 1.2 A.


Part #: 2736479
$533.00Add to Cart
Availability :
Backordered

Phoenix Contact Distributed I/O Device

Supply Voltage: 24 VDC
Connection: M12, Fast connection technology
Used For: CANopen
Nominal Current: 1.2 A
Input: 16 Digital
Product Type: Distributed I/O Device
Supply voltage: 24 VDC
  • Digital inputs
    Connection method: M12 plug connectors, double occupancy
    Connection method: 2, 3, 4-wire
    Filter time: 1 ms
    Input characteristic curve: IEC 61131-2 type 1
    Input name: Digital inputs
    Input voltage: 24 V DC
    Input voltage range "0" signal: -30 V DC ... 5 V DC
    Input voltage range "1" signal: 13 V DC ... 30 V DC
    Number of inputs: 16
    Protective circuit: Protection against polarity reversal
  • Fieldline potential routing
    Current consumption from U<sub>L</sub>: Typ. 65 mA
    Current consumption from U<sub>L</sub>: max. 100 mA
    Current consumption from U<sub>S</sub>: Typ. 8 mA (plus sensor current)
    Current consumption from U<sub>S</sub>: max. 1.2 A
    Power supply at U<sub>L</sub>: max. 4 A
    Power supply at U<sub>S</sub>: max. 4 A
    Voltage supply U<sub>L</sub>: 24 V DC
    Voltage supply U<sub>S</sub>: 24 V DC
  • General data
    Air pressure (operation): 80 kPa ... 106 kPa (up to 2000 m above sea level)
    Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000 m above sea level)
    Ambient temperature (operation): -25 °C ... 60 °C
    Ambient temperature (storage/transport): -25 °C ... 85 °C
    Degree of protection: IP65/67
    Depth: 44.5 mm
    Drill hole spacing: 151 mm
    Height: 161 mm
    Mounting type: Wall mounting
    Permissible humidity (storage/transport): 95 %
    Protection class: III, IEC 61140, EN 61140, VDE 0140-1
    Test section: 24 V supply (bus logics) / FE
    Test section: 24 V supply (bus logics) / Digital inputs (sensor supply / I/O) 500 V AC 50 Hz 1 min
    Test section: FE / Digital inputs (sensor supply) 500 V AC 50 Hz 1 min
    Weight: 310 g
    Width: 60 mm
  • Interface
    Address area assignment: 1 ... 126, adjustable
    Connection method: 2 M12 plug connectors, A-coded
    Fieldbus system: CANopen
    Name: CANopen
    Number of positions: 5
    Transmission physics: Copper cable with optional power supply in acc. with CAN standard
    Transmission speed: Maximum 1 Mbaud automatic detection
    Transmission speed: 10, 20, 50, 125, 250, 500, 1000 kBit/s (Automatic baud rate detection)
  • Power supply for module electronics
    Connection method: M12 plug connectors, (A-coded)
    Name: U<sub>L</sub>
    Supply voltage: 24 V DC
    Supply voltage range: 18 V DC ... 30 V DC IEC 61131-2 (including ripple)
Email this page to a friend
Part Number Tags: N/A

This part number has been discontinued by {Manufacturer}. Use the contact form below to find out the new compatible part.

Updating...