Menu

2702377 - Phoenix Contact Transformer Terminal

Transformer terminal block Transformer terminal block, Connection method: Screw/Slip-on connection, Length: 34.7 mm, Width: 15 mm, Height: 28.3 mm, Color: gray, Mounting type: DIN rail, Coil snap-in device


Part #: 2702377
$303.00 / Pack of 50Add to Cart
(Phoenix Contact restricts buying this item to increments of 50)
Availability :
Backordered

Phoenix Contact Transformer Terminal

Length: 34.7 MM
Color: Gray
Connection: Screw/Slip-on Connection
Width: 15.0 MM
Terminal Type: Transformer Terminal Block
Mounting: DIN Rail, Coil Snap-in Device
Height: 28.3 MM
Product Type: Transformer Terminal
  • Connection data
    2 conductors with same cross section, solid max.: 1.5 mm²
    2 conductors with same cross section, solid min.: 0.2 mm²
    2 conductors with same cross section, stranded max.: 1.5 mm²
    2 conductors with same cross section, stranded min.: 0.2 mm²
    2 conductors with same cross section, stranded, ferrules without plastic sleeve, max.: 1.5 mm²
    2 conductors with same cross section, stranded, ferrules without plastic sleeve, min.: 0.25 mm²
    2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, max.: 2.5 mm²
    2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, min.: 0.5 mm²
    Conductor cross section AWG/kcmil max: 10
    Conductor cross section AWG/kcmil min.: 24
    Conductor cross section solid max.: 6 mm²
    Conductor cross section solid min.: 0.2 mm²
    Conductor cross section stranded max.: 4 mm²
    Conductor cross section stranded min.: 0.2 mm²
    Conductor cross section stranded, with ferrule with plastic sleeve max.: 2.5 mm²
    Conductor cross section stranded, with ferrule with plastic sleeve min.: 0.25 mm²
    Conductor cross section stranded, with ferrule without plastic sleeve max.: 4 mm²
    Conductor cross section stranded, with ferrule without plastic sleeve min.: 0.25 mm²
    Connection method: Screw/Slip-on connection
    Internal cylindrical gage: A4
    Screw thread: M3
    Stripping length: 8 mm
    Tightening torque, min: 0.6 Nm
  • Dimensions
    Height: 28.3 mm
    Length: 34.7 mm
    Width: 15 mm
  • General
    Color: gray
    Inflammability class according to UL 94: V2
    Insulating material: PA
    Note: For transformers on ships, saltwater-proof DIN rails must be used according to the regulations of Germanic Lloyd. This requirement is fulfilled by all rail designs.
    Note: When selecting the type of connection on safety transformers in acc. with IEC 742/EN 60742/DIN VDE 0551-1, please observe:- When safety transformers are used as self-contained devices, only screw connections are permitted for the external connections.- When installing safety transformers, the specifications of the respective devices must be observed.
    Number of connections: 4
  • Technical data
    Connection in acc. with standard: IEC / EN
    Nominal current I<sub>N</sub>: 25 A
    Nominal voltage U<sub>N</sub>: (voltage data only possible in conjunction with transformer)
    Number of positions: 2
    Pollution degree: 3
    Rated insulation voltage: 690 V
    Rated surge voltage: 8 kV
    Surge voltage category: III
Email this page to a friend
Part Number Tags: N/A

This part number has been discontinued by {Manufacturer}. Use the contact form below to find out the new compatible part.

Updating...