Menu

1585045 - Phoenix Contact Panel Feed-Through

Panel feed-through Panel feed-through, with wire output 1.5 mm² and 0.5 m litz wire: connecting thread: M20x1.5, 4-pos., black


Part #: 1585045
$23.37Add to Cart
Availability :
Backordered

Phoenix Contact Panel Feed-Through

Color: Black
Cable Length: 0.5 M
Positions: 4
Connection: QUICKON Connection
Connecting Thread: M20 x 1.5
Wire Type: Litz Wire
Product Type: Panel Feed-Through
  • Conductor data
    External cable diameter: 6 mm ... 12 mm
    Structure of individual litz in acc. with VDE 0295 / smallest wire diameter: VDE 0295 class 1 to 6 / min. 0.15 mm
    Wire diameter including insulation: >= 1.8 mm ... 3 mm
    Wire insulation material: PVC/PE
  • Electrical characteristics
    Nominal current I<sub>N</sub>: 15 A
    Note on the rated voltage (II/2): with insulating sleeve
    Note on the rated voltage (III/2): with insulating sleeve
    Note on the rated voltage (III/3): with insulating sleeve PT/FS 4,8. Without insulating sleeve 250 V AC.
    Rated current: 15 A
    Rated surge voltage (II/2): 6 kV
    Rated surge voltage (III/2): 6 kV
    Rated surge voltage (III/3): 6 kV
    Rated voltage (II/2): 1000 V
    Rated voltage (III/2): 800 V
    Rated voltage (III/3): 500 V
  • Environmental conditions
    Ambient temperature (operation): -40 °C ... 80 °C (specifications of the cable manufacturer must also be observed)
    Ambient temperature (operation): -25 °C ... 50 °C (when the conductor is connected. Specifications of the cable manufacturer must also be observed.)
    Degree of protection: IP65/67
    Temperature when conductor connected: -5 °C ... 50 °C (specifications of the cable manufacturer must also be observed)
  • General characteristics
    Color: black
    Conductor cross section AWG/kcmil max: 16
    Conductor cross section AWG/kcmil min.: 18
    Conductor cross section solid max.: 1 mm²
    Conductor cross section solid min.: 0.75 mm²
    Conductor cross section stranded max.: 1.5 mm²
    Conductor cross section stranded min.: 0.75 mm²
    Connection: If the conductor is reconnected, it must be cut off above the last contact point. QUICKON components may only be operated when under no load.
    Connection method: QUICKON connection
    Connection method: Single litz wires 50 cm long; 1.5 mm<sup>2</sup>
    Note on the internal connection type: Pos. 1: Brown; pos. 2: White; pos. 3: Blue; pos. 4: Black
    Number of connections: 4
    Number of positions: 4
    Tightening torque contact carrier: 4.5 Nm
    Tightening torque, counter nut: 4.5 Nm
    Tightening torque, union nut: 3 Nm
    Wrench size, contact carrier: 24 mm
    Wrench size, union nut: 19 mm
  • Material data
    Contact carrier material: PA
    Contact material: CuZn
    Contact surface material: Tin-plated
    Insulating material: PA
  • Mechanical characteristics
    Impact category: 3
    PC QUICKON thread type: M20
    QUICKON connectability: max. 10 (if the conductor is connected more than once, seal and cap may need to be replaced.)
Email this page to a friend
Part Number Tags: N/A

This part number has been discontinued by {Manufacturer}. Use the contact form below to find out the new compatible part.

Updating...