Menu

1434730 - Phoenix Contact Sensor/Actuator Cable

Sensor/Actuator cable Sensor/Actuator cable, 12-position, PUR, Black RAL 9005, shielded, Free cable end, on Socket straight M12-SPEEDCON, A-coded, Cable length: 1 m


Part #: 1434730
$62.50Add to Cart
Availability :
Backordered

Phoenix Contact Sensor/Actuator Cable

Color: Black
Material: Outer Sheath: PUR
Coding: A-Coded
Shielding: Yes
Cable End 1: Free Cable End
Positions: 12
Cable End 2: On Socket Straight, M12-SPEEDCON
Cable Length: 1.0 M
Cable Type: PUR
Electronic Field Cabling Products: Sensor Cables
Product Type: Sensor/Actuator Cable
  • Conductor data
    Acceleration: 10 m/s²
    Ambient temperature (operation): -40 °C ... 80 °C (cable, fixed installation)
    Ambient temperature (operation): -5 °C ... 80 °C (cable, flexible installation)
    AWG signal line: 26
    Bending radius: 85 mm
    Cable type: Black PUR/PVC twisted pair
    Cable type (abbreviation): 35T
    Conductor cross section: 0.14 mm²
    Conductor material: Tin-plated Cu litz wires
    Conductor resistance: 142 ?/km
    Conductor structure signal line: 18x 0.10 mm
    Core diameter including insulation: 1 mm ±0.05 mm
    External cable diameter: 8.50 mm
    External sheath, color: Black RAL 9005
    Flame resistance: DIN VDE 0472 part 804, test type B
    Material conductor insulation: PVC
    Number of bending cycles: 2000000
    Optical shield covering: 85 %
    Outer sheath, material: PUR
    Overall twist: Six pairs around the filler to the core
    Shielding: Tinned copper braided shield
    Traversing path: 10 m
    Traversing rate: 3 m/s
    Wire colors: White-brown, green-yellow, gray-pink, blue-red, black-violet, gray/pink-red/blue
  • General characteristics
    Coding: A - standard
    Contact carrier material: PA 66
    Contact material: CuZn
    Contact surface material: Ni/Au
    Degree of protection: IP65/IP68/IP69K
    Material of grip body: TPU, hardly inflammable, self-extinguishing
    Material, knurls: Zinc die-cast, nickel-plated
    Pollution degree: 3
    Sealing material: NBR
    Standards/regulations: M12 connector IEC 61076-2-101
    Status display: No
    Surge voltage category: II
    Torque: 0.4 Nm (M12 connector)
  • General data
    Ambient temperature (operation): -25 °C ... 90 °C (Male connector / female connector)
    Insulation resistance: ? 100 M?
    Length of cable: 1 m
    Number of positions: 12
    Rated current at 40°C: 1.5 A
    Rated voltage: 30 V
    Stripping length of the free conductor end: 35 mm
    Volume resistance: ? 5 m?
Email this page to a friend
Part Number Tags: N/A

This part number has been discontinued by {Manufacturer}. Use the contact form below to find out the new compatible part.

Updating...