Filters

Manually Selected

UN-SELECTED FILTERS

• Sub Type
  • Accessories
  • AMONet
  • Centralized Montrol Control
  • EtherCAT Solution
• Input Voltage
  • 12 VDC direct from PCIe slot, or AT/ATX System power input
  • 12 VDC direct from PCIe slot, total Max. 18W or AT/ATX
  • Dry contact (need external voltage source)
  • Logic 0: 5 V max.; Logic 1: 6 V min. (24V max.); Needs 24VDC external power
• 2-axis Circle Interpolation
  • V
• 2-axis Circle<br>Interpolation
  • V
• AMONet RS-485
  • 2 rings
• API
  • Advantech Common Motion Library
• BoardID Switch
  • V
• Bus
  • AMONet RS-485
  • ISA
  • Universal PCI V2.2
• Bus Interface
  • PCI Express® x4
  • PCI Express® x4 compliant
• Bus Type
  • Universal PCI V2.2
• Cable Type
  • CAT5 UTP/STP Ethernet cable and above
• Category
  • Encoder Card
  • Pulse Type
• Certification
  • CE, FCC Class A
• Certifications
  • CE, FCC class A
• Channels
  • 16
  • 32
  • 4
  • 8
• Communication Cycle Time
  • 100 us
• Communication Distance (Max.)
  • 100 m @ 20 Mbps w/32 slave modules; 100 m @ 10 Mbps w/64 slave modules
• Communication IO Slave
  • 128 port DI (128 byte) / 128 port DO (128 byte); 128 channel AI (256 byte) and 128 channel AO (256 byte) (based on ADAM-5000/ECAT)
• Communication Motion Slave
  • 32 Servo Drive Max.(eq. Panasonic A5B)
• Compatibility
  • IEEE 802.3, IEEE 802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.3af
  • IEEE802.3af
• Connection
  • AT/ATX Power Jack
• Connectors
  • 1 x screw-terminal for RS-485 (communication); 1 x DB9-M for RS-232 (internal use); 1 x screw-terminal for power input; 2 x RJ-45 for LAN
  • 2 x RJ45, 1 x D-sub 15
• Counts per Enc. Cycle
  • x1, x2, x4 (A/B phase only)
• CPU
  • 32-bit ARM RISC
• Cycle Time
  • Motion: 500 us; I/O: 200 us
• Data Flow Control
  • Automatic
• Data Transfer Rates
  • Up to 100 Mbps
• Description
  • 40-pin Wiring Board with LED
  • 4-Axis 100-pin SCSI DIN-rail motion wiring board
  • 50-pin SCSI DIN-rail Motion Wiring Board
• Digital input interrupt
  • Falling and Rising edge, normal and invert
• Dimensions
  • 125 x 47.6 x 151 mm
  • 141 x 108 x 60 mm (5.6" x 4.3" x 2.4")
  • 141 x 95 x 60 mm (5.6" x 3.7" x 2.4")
  • 175 x 100 mm (6.9" x 3.9")
  • 185 x 100 mm (7.3" x 3.9")
• Dimensions (L x H)
  • 175 x 100 mm (6.9" x 3.9")
• Dimensions (W x H x D)
  • 231 x 110 x 75 mm
• Dimensions (W x L x H)
  • 103 x 120 x 45 mm (4.12" x 4.8" x 1.8")
  • 122 x 171 x 45 mm (4.8" x 6.73" x 1.77")
  • 160 x 50 x 43 mm (6.3" x 2" x 1.7")
• EFT Protection
  • 2 KV
• Emergency Stop Input Channels
  • 1
• Encoder Channels
  • 2
  • 4
• ESD
  • 8KV (air), 4KV (contact)
• General Digital I/O
  • 16-ch DI, 16-ch DO
  • 32-ch DI, 32-ch DO
• General Purpose<BR>DI Channels
  • 12
  • 16
  • 2
  • 31
  • 4
  • 6
  • 8
• General Purpose<br>DO Channels
  • 16
  • 32
  • 4
  • 8
• Home Input Channels
  • 2
  • 4
• Humidity
  • 5 ~ 95% RH, non-condensing (IEC 60068-2-3)
  • 5 ~ 95% RH, non-condensing (IEC 6008-2-3)
• I/O Module Isolation
  • 3,000 VDC
• I/O Slots
  • 4
• Input Impedance
  • 2.4 kW @ 0.5 W
  • 3.2kO
• Input Resistance
  • 8.4 k Ω
• Input Type
  • Dry contact
  • Quadrature (A/B phase) or up/down
• Input/Output range
  • 0-30V opto-isolated
• Interface
  • 2 x RJ-45
  • Half duplex RS-485
• Interpolation
  • 2 to 4-axis linear, 2-axis circular, X-Y plane with Z thread helical interpolation
  • 2 to 6-axis linear, 2-axis circular, X-Y plane with Z thread helical interpolation
  • 2 to 8-axis linear
  • 2 to 8-axis linear, 2-axis circular, X-Y plane with Z thread helical interpolation
  • 2-axis linear
  • 2-axis linear interpolation
  • 2-axis linear, 2-axis circular
  • 2-axis linear, 3-axis linear, 2-axis circular
• Isolation Protection
  • 1,000 VDC
  • 2,500 VDC
  • 2,500 VRMS
  • 2.5 KV
  • 3,750 VRMS
• Jumbo Frame
  • 9KB
• LAN Communication
  • 1,500 VDC
• LED Indicators
  • Power, System status, EtherCAT RUN, EtherCAT ERROR, EtherCAT Port 0 LINK, EtherCAT Port 1 LINK
• Limit Switch Input
  • 4
  • 8
• Linear Interpolation
  • V
• Machine Interfaces
  • LMT+, LMT-, ORG
• Max. frequency
  • 1KHz
• Max. Input Frequency
  • 1 MHz
  • 10 MHz under 4xAB mode
  • 4 MHz under 4xAB mode
  • 8 MHz for pulse/direction and up/down modes 2 MHz for quadrature mode without digital filter 1 MHz for quadrature mode with digital filter
• Max. Output Speed
  • 1 Mbps
  • 5 Mbps
• Maximum Power Consumption
  • 5 W
• Memory
  • Flash ROM: 64M SPI; RAM: 4G DDR3
• Motor Driver Support
  • Pulse-type servo/stepping
  • Servo/stepping
  • Stepping
• Mounting
  • DIN-rail, Wall
• No. of Channels
  • 2 input and output
• No. of ports
  • 2
  • 2 Gigabit Ethernet Media Access Control (MAC) and physical layer (PHY) ports
  • 2 or 4 Gigabit Ethernet Media Access Control (MAC) and physical layer (PHY) ports
• Number of Axes
  • 2
  • 3
  • 4
  • 6
• Number of Axis
  • 2
  • 4
  • 6
  • 8
• Number of Rings
  • 2 (Motion x 1, I/O x 1)
• Operating Humidity
  • 5 ~ 95% (non-condensing)
  • 5 ~ 95% RH
• Operating Temperature
  • 0 ~ 50° C (32 ~ 122° F)
  • 0 ~ 50°C (32 ~ 122°F)
  • 0 ~ 60°C (32 ~ 140°F)
  • -10 ~ 70°C (14 ~ 158°F)
• Opto-Isolator Response
  • 100 µs (Max)
• Output PoE Power
  • 48 VDC PoE Power output
  • 48 VDC PoE Power output, total Max. 18W(total Max. 60W with AT/ATX System power input)
• Output Type
  • Open collector
  • Sink
  • Sink (NPN) (open collector Darlington transistors)
• Output Voltage
  • 10 ~ 30 VDC
  • 12 ~ 24 VDC
• Overload Current
  • Present Protection
• Overvoltage Protection
  • Yes
• Port Connector
  • 8-pin RJ45
• Position Compare Event
  • V
• Position Counters
  • Range of command and actual position
• Position Latch
  • V
• Power Consumption
  • 2 W @ 24 V typical
  • 2.5 W @ 24 VDC (not including I/O modules)
  • 5 VDC @ 0.5 A typical
  • 5 W @ 24 V typical
  • 600mW typical, 2 W max.
  • Typical: +5V @ 200 mA Max.: +5V @ 450 mA
  • Typical: 5 V @ 0.6 A, Max.: 5 V @ 1 A
  • Typical: 5 V @ 300 mA 3.3 V @ 1.2 A; Max.: 5 V @ 400 mA 3.3 V @ 1.5 A
  • Typical: 5 V @ 340 mA; Max.: 5 V @ 500 mA
  • Typical: 5 V @ 530 mA 3.3 V @ 160 mA; Max.: 5 V @ 500 mA 3.3 V @ 1 A
  • Typical: 5 V @ 850 mA; Max.: 5 V @ 1 A
• Power Input
  • 10 ~ 30 VDC
• Power Reversal Protection
  • Yes
• Power Supply
  • 10 ~ 30 VDC (2A max)
• Pulse Output Type
  • Pulse/direction (1-pulse, 1-direction type) or CW/CCW (2-pulse type)
• Servo Driver Interfaces
  • ALM, INP
• Servo On Output Channels
  • 2
  • 4
  • 6
• Simultaneously Start/<br>Stop among Modules
  • V
• Sink Current
  • 1 ch: 500 mA (1 port)
  • 1 ch: Max. 0.5 A; 4 ch: Max. 1.1 A (total)
  • Max: 300 mA CH
• Slave Module
  • Digital I/O, Motion Control, Analog I/O
• Slow Down Limit Switches
  • 4
  • 8
• Speed
  • 10/100/1000 Mbps
  • 1000 Mbps
• Step Count Range
  • ±2, 147, 483, 646
• Storage Temperature
  • -20 ~ 80°C (-4 ~ 176°F)
  • -20 ~ 85°C (-4 ~ 185°F)
  • -25 ~ 85°C (-13 ~ 185°F)
• Surge Protection
  • 1 KV
  • 10 kV
• Temperature (Operating)
  • 0 ~ 60°C (32 ~ 140°F)
• Temperature (Storage)
  • -20 ~ 70°C (-4 ~ 158°F)
  • -20 ~ 80°C (-4 ~ 170°F)
  • -20 ~ 85°C (-4 ~ 185°F)
• Transmission Speeds
  • 2.5, 5, 10, and 20 Mbps
• Typical Power Consumption
  • 1.2 W
• Velocity Profiles
  • T-Curve, S-Curve
• Windows Utility
  • Network setting, I/O configuration
• Wiring
  • UTP, category 5 or greater