Your shopping cart is currently empty.
Filters
Manually Selected
Department: Electro-Mechanical | |
Product Type: Industrial Automation Products | |
Product Sub-Type: Others |
UN-SELECTED FILTERS
- Sub Type
- Analog I/O Modules
- Cabinet Controller
- Controllers
- Counter/Frequency Modules
- Data gateway
- Digital I/O Modules
- Ethernet I/O Modules with Daisy Chain: ADAM-6200
- Ethernet I/O Modules: ADAM-6000
- EtherNet/IP Modules: ADAM-6100EI
- I/O Rack
- IEEE802.15.4 Wireless I/O Modules: ADAM-2000
- IoT Ethernet I/O Modules: WISE-4000/LAN
- Operator HMI
- Operator Panel Controller
- Power Supplies Modules
- PROFINET Modules: ADAM-6100PN
- Robust Remote I/O Modules
- RS-232/422/485 Converters
- RS-232/422/485 to Fiber Optic Converters
- RS-422/485 Repeaters
- SCADA System
- WLAN IoT Wireless I/O Modules: WISE-4000
- Type
- Input Voltage
- Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~0.8 VDC max. Logic level 1: 2~5 VDC
- Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
- Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 2 VDC max. Logic level 1: 4~30 VDC
- Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 3 VDC max. Logic level 1: 10~30 VDC
- Dry contact: Logic level 0: close to GND Logic level 1: open Wet contact: Logic level 0: 3 VDC max. Logic level 1: 10~50 VDC
- Logic level 0: 1 V max. Logic level 1: 3.5~30 V
- Logic level 0: 1 VDC max. Logic level 1: 10~30 VDC
- Logic level 0: 1 VDC max. Logic level 1: 3.5~30 VDC
- Logic level 0: 1 VDC max. Logic level 1: 3~30 VDC
- Logic level 0: close to GND Logic level 1: open
- Accuracy
- Action Logs
- Alarm Groups per SCADA
- Alarm Logs
- Antenna Connector
- BACnet Server
- Baud Rate (bps)
- Breakdown Voltage
- Burn-out Detection
- Centralized logs on project node via ODBC
- Certifications
- Channel
- Channel Independent Configuration
- Channels
- 1
- 1 (2, 3, or 4-wired)
- 11 - 26
- 12 (Sink type) Open collector to 40V, 200 mA max. load
- 12 (Source type) VCC: 10~35 VDC, Current: 1 A (per channel) Over current detection and protection
- 16
- 16 (Sink Type)
- 16 (Sink type) 8~35V, 100 mA per channel
- 2 Open collector to 30V, 30 mA max. load
- 2 (Sink type) Open collector to 30V, 100 mA max. load Support 5 kHz pulse output
- 2, open collector to 30V, 100 mA max. load
- 2-ch (Sink Type)
- 2-ch Relay
- 4
- 4 (Dry Contact only)
- 4 Form C
- 4 Open collector to 30 V, 500 mA max. for resistance load
- 4/8
- 4-ch Dry Contact or Wet Contact
- 4-ch relay
- 5 Form C 1 Form A
- 5 Form C and 1 Form A
- 6 (2 or 3-wired)
- 6 (Sink type) Open collector to 30V, 100 mA max. load Support 5 kHz pulse output
- 6 Non-Isolation (Differential)
- 6-ch power relay support pulse output
- 6-ch relay support pulse output
- 7 (differential, each channel can be configured with different range)
- 7 (Sink Type)
- 7 (Sink type) 8~35V, 100 mA per channel
- 8 Open collector to 30V, 30 mA max. load
- 8 Open collector to 40V, 1 A max. load Support 1 kHz pulse output
- 8 Open collector to 40V, 200 mA max. load
- 8 (differential)
- 8 (differential, each channel can be configured with different range)
- 8 (Source type) 10~35 VDC, 1 A per ch. Support 5 kHz pulse output
- 8 differential
- 8, open collector to 30V, 100 mA max. load
- 8-ch Dry Contact or Wet Contact
- 8-ch power relay
- 8-ch relay
- 8-ch relay Support 100 Hz pulse output
- Channles
- CMR @ 50/60 Hz
- Comm. Distance
- Common Mode
- Common Mode Volts
- Communication
- Communication Line Isolation
- Communication Mode
- Communication Protocol
- Communication Speed
- Connectors
- 1 x DB9-M/DB9-F/screw terminal for RS-485 (communication), 1 x DB9-F for RS-232 (configuration), 1 x Screw-terminal for power input
- 1 x DB9-M/DB9-F/screw terminal for RS-485 (communication), 1 x DB9-F for RS-232 (internal use), 1 x Screw-terminal for power input, 2 x RJ-45 for LAN
- 1xplug-in terminal block (#14~22 AWG) (RS-232/422/485) 2x ST fiber connector
- COM 1 : 1 x RS-232/485, COM 2 : 1 x RS-485, COM 3 : 1 x RS-232/485, COM 4 : 1 x RS-232/485
- COM1 : DB9-M, COM2 : Screw terminal (RS-485), COM3 : DB9-F (RS-232/Programming), COM4 : DB9-M (RS-232/485), Power : Screw terminal, LAN : RJ-45 (option)
- I/O: Terminal block; Power: Micro USB
- Plug-in screw terminal block (I/O and power)
- Contact Rating
- Control Software
- Counter Input
- CPU
- Cross Browser and Platform
- Current Input
- Current Load Resistor
- Current Output
- Data Bits
- Data Flow Control
- Data Format
- Data Log
- Data Logger
- Data Transfer
- DDE Server
- Delay Output
- Description
- Device Loop Group
- Device Redundancy
- Dimensions
- Dimensions (W x H x D)
- Direct Sensor Input
- Displays
- Drift
- Driving Load
- Dry Contact
- Enclosure
- Equipment Group
- Ethernet
- Frequency Band
- Frequency Input
- Frequency of Operation
- Function
- GCL
- Google Maps and GPS Location Tracking
- High Common Mode
- Holiday Configuration Group
- Humidity
- Humidity (Operating)
- I/O Capacity
- I/O Module Isolation
- I/O Slots
- I/O Tag Number
- IEEE Standard
- Input Frequency
- Input Impedance
- > 10 MΩ (voltage) ;120 WΩ (current)
- >10 MOhm
- >10 MΩ (Voltage), 120Ω (Current)
- 10 MOhm
- 100 kΩ
- 120 Ω
- 2 MOhm
- 20 MOhm
- 5.2 kW (Wet Contact)
- Thermocouple: 20 MOhm Current: 120 Ohm
- Voltage: >10 MOhm Current: 120 Ohm
- Voltage: >10MΩ; Current: 120Ω
- Voltage: 20 MOhm
- Voltage: 20 MOhm Current: 120 Ohm
- Voltage: 20 MOhm Current: 125 Ohm
- Voltage: 800 kOhm Current: 120 Ohm
- Input Max Voltage
- Input Type
- Insulation Resistance
- Interface
- Internal Tag Number
- Inverted DI Status
- Isolation
- Isolation between Contact
- Isolation Protection
- Item per Unit
- Keep/Discard Counter Value when power off
- LAN
- LAN Ports
- LED Indicators
- 16 DI
- 16 DO
- 4 RL + 4 DI
- 6 RL
- 8 DI + 7 DO
- Comm
- Ext PWR, Error, Status, Level Index
- Power
- Power (3.3 V) RUN Communication (Link, Active, 10/100 Mbps, Tx, Rx)
- Power, CPU, communications
- Power, CPU, communications and battery
- Power, DI
- Power, DIO
- Power, DO
- Power, Relay
- Power, User defined
- Status, Comm
- Status, Comm, and Ch. enable
- Status, Comm, and DIO
- Status, Comm, and Relay
- Status, Comm, Link, Speed
- Status, Communication, Network Mode, Quality
- Status, Communication, Network Mode, Quality Serial Tx, Rx
- Status, Tx/Rx
- lnput Range
- lnput Type
- Logic level
- Max. Breakdown Capacity
- Max. Nodes
- Max. Switching Voltage
- Maximum Switching
- Medium
- Memory
- Modbus Server
- Modulation Type
- Mounting
- Multi-touch Gesture
- Network Mode
- Network Protocols
- NMR @ 50/60 Hz
- Normal Output Current
- Number of Built-in Widget
- Number of data logging
- Number of Graphic Pages
- ODBC and SQL Query
- OPC DA/UA Server
- Open Widget Interface
- Operating Humidity
- Operating System
- Operating Temperature
- Optical Power Budget (Attenuation)
- Outdoor Range
- Output Impedance
- Output Ranges
- Output Rating (Resistive Load)
- Output Settling Time
- Output Slope
- Output Type
- Output Voltage Range
- Over Voltage Protection
- Parity
- Peer-to-Peer
- Plug-in Screw Terminal
- Ports
- Power Consumption
- 1.5 W @ 5 VDC
- 17 W @ 24 VDC (not include I/O modules)
- 17w @ 24 VDC (Not include I/O modules)
- 2.2 W @ 24 VDC
- 2.5 W @ 24 VDC
- 2.5 W @ 24 VDC (not including I/O modules)
- 2.7 W @ 24 VDC
- 3 W @ 24 VDC
- 3 W @ 24 VDC (not including I/O modules)
- 3.2 W @ 24 VDC
- 3.5W @ 24 VDC
- 4 W @ 24 VDC (not including I/O modules)
- 4.0 W @ 24 VDC (not including I/O modules)
- 4.2 W @ 24 VDC
- 4.5 W @ 24 VDC
- 5.0 W @ 24 VDC (not including I/O modules)
- Power Dissipation
- Power Input
- Power Requirement
- Power Reversal
- Programmable
- Protection
- Protocol
- Protocols
- Pulse Output
- Real-time Clock
- Receiver Sensitivity
- Recipes per Project
- Relay Off Time (Typ.)
- Relay off Time(Typ.)
- Relay On Time (Typ.)
- Relay on Time(Typ.)
- Reliability Check
- Reporting / Excel Reporting
- Resolution
- RF Data Rate
- Sampling Rate
- Sampling Rates
- SCADA Redundancy
- Scheduler Reservation Group
- Script language
- Security
- Serial Ports
- Serial Signal
- Set/Reset Time
- Span Drift
- Speed Modes (bps)
- Speeds (kbps)
- Stop Bits
- Storage
- Storage Humidity
- Storage Temperature
- Support IPv6
- Supports Inverted DI Status
- Tag Source
- Temperature (Operating)
- Temperature (Storage)
- Time Zone Group
- Topology
- Transient Protection
- Transition Time
- Transmission Distance
- Transmission Mode
- Transmit Power
- Unit per Recipe
- USB Port
- Variables per Graphic Pages
- Video
- Voltage Range
- ±10 V
- ±10 V, +0 ~ 10 V, 0 ~ 20 mA, +4 ~ 20 mA
- ±100 mV ±500 mV ±1 V ±2.5 V ±5 V ±10 V
- ±15 mV,±50 mV,±100 mV ,± 500 mV,±1 V,±2.5 V
- ±150 mV ±500 mV ±1 V ±5 V ±10 V
- ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V, ±20 V
- 0 ~ 150 mV, 0 ~ 500 mV, 0 ~ 1 V, 0 ~ 5 V, 0 ~ 10 V, 0 ~ 15 V, ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V, ±15 V, ±20 mA, 4 ~ 20 mA
- 0~10 V
- 0~150 mV 0~500 mV 0~1V 0~5 V 0~10 V ±150 mV ±500 mV ±1 V ±5 V ±10 V ±15 V
- 0~5 V 0~10 V ±5 V ±10 V
- 15 mV ±50 mV ±100 mV ±500 mV ±1 V ±2.5 V
- Watchdog Timer
- Wavelength
- Web API
- Web Client
- Web Server
- WebAccess Express
- Wet Contact
- Zero Drift
Electro-Mechanical » Industrial Automation Products » Others
View Variants »ACP-1010
View Variants »ACP-2000
View Variants »ACP-2010MB
View Variants »ACP-2320MB
View Variants »ACP-4000
View Variants »ACP-4010
View Variants »ACP-4020
View Variants »ACP-4320
View Variants »ACP-4340
View Variants »ACP-4360
View Variants »ACP-4D00
View Variants »ADAM-2017PZ
View Variants »ADAM-2031Z
View Variants »ADAM-2051PZ
View Variants »ADAM-2051Z
View Variants »ADAM-2510Z
View Variants »ADAM-2520Z
View Variants »ADAM-4012
View Variants »ADAM-4013
View Variants »ADAM-4015